| Parameters | Range | Best
Measurement Uncertainty |
| Length | 0 to 200 feet | +/- .000003" |
| Mass | 5500
lbs dead weight 0mg to 200g |
+/-
4.5mg +/-.0066mg |
| 200g to 5kg | +/- .002g | |
| 10 lbs to 100lbs | +/- .00002lbs | |
| Force-Tension | 0 to 100,000 lbf | +/- .001% |
| Force-Compression | 0 to 200,000 lbf | +/- .001% |
| Torque | 0 to 2,000 ftlb | +/- .061% |
| Pressure-Pneumatic | 0 to 5,000 psi | +/- 15 ppm |
| Pressure-Hydraulic | 0 to 25,000 psi | +/- .015% |
| Vacuum | 0 to 30 inhg | +/- 4.66x10E-6 Torr |
| Flow-liquid | 0 to 150 gpm | +/- .11% |
| Flow-Gaseous | 0 to 100 scfm | +/- .5% |
| Air Velocity | 0 to 6500 fpm | +/- 1.12% |
| Temperature | -70 to 1000 Deg. C | +/- .005 Deg. C |
| Humidity-Dew Point | 0 to 100% RH | +/-.04C Dew Point |
| Specific Gravity | .695 to 2.000 | +/- .0005 Sp. Gr. |
| pH | 0 to 14pH | +/- .01% |
| DC & AC Volts | 0 to 40,000 V | +/- 2.1 uV |
| Amperage | 0 to 2,000 Amps | +/- .1% |
| Resistance | 001
Ohm to 1Tetra Ohm |
+/- 2.0E-6 Ohms |
| Capacitance | .0001aF to 9999.9F | +/- 76.8 ppm |
| Inductance | .0001 nH to 9999.9 MH | +/- 76.8 ppm |
| Frequency | 1Hz to 40Ghz | +/- 1.0E-12Hz |
| Hardness | Micro to Brinell | ASTM E14 |
| Flatness | Plates to 60X120" | +/- .00001" |
| Timers | .01 sec to 24 hours | +/- .001 sec |
| Level | to 8 feet in length | +/- .00001 in/ft |
| RPM | 0 to 20,000 | +/- .01%FS |
| Conductivity (Liquids) | 10 to 10,000 u mhos/cm | +/- .25% |
| Conductivity (metals) | 9.7 to 101.0 IACS | +/- .35 IACS |
| Magnetics | 100 to 10,000 Gauss | +/- .5% |
| Acceleration | 0 to 10,000 HZ & +/- 50 g | +/- 1.6% |
| Viscosity | 1.0 to 2,200 cSt | +/- .4% |
Note: Uncertainty listed is best measurement in any range. All % values are % of reading unless noted. Standards are traceable to the NIST, Intrisinc standards or suitable reference materials. |
||
1533 Lincoln Avenue
• Holbrook, New York 11741
Phone (631) 471-6900 • Fax (631) 471-6902
Toll Free 1-800-790-0512